 | Horizontal Cylindrical
HORIZONTAL CYLINDRICAL TANKS FABRICATED WITH FIBERGLASS REINFORCED PLASTIC
Stationary Horizontal Cylindrical Tanks are fabricated using the Filament Winding Process in compliance with ASTM D-3299 Norms, utilizing resins of high chemical resistance reinforced with glass fibers of the unidirectional, bidirectional and multidirectional types. The structures of the body, covers and supports are calculated considering simultaneous loads of wind and earthquake. | The tanks are designed for installation on a flat stable surface, with no bumps or irregularities so that the supporting structures may rest properly. The following are considered as standard accessories: manhole with cover, gasket and bolts, fittings for loading and drainage, vent, bottom hold-down inserts, lifting lugs, see-through band for level and nameplate. Tanks are delivered with calculation documents, installation and inspection procedure instructions, showing the number, size and type of hold-down bolts required.
The table below shows the capacities and the main standard dimensions. It is possible to vary some dimensions and accessories according to needs.
To define well the shape, resin and structure for a specific condition, it is important to provide the following parameters.
Product to be stored
Concentration
Specific weight
Operating temperature
Maximum temperature
Seismic characteristics of the location Eventual and operational overloads |
CYLINDRICAL FRP HORIZONTAL STATIONARY SURFACE TANKS
Specification tables |
| Nominal
Volume
( lts ) | Tehoritical
Volumen
( lts ) | Capacity
( m3 ) | Diameter
( mts ) | Length
( mts ) | Total Height
( mts ) | 5.000 | 5,10 | 1,60 | 2,18 | 2,85 | 2,05 | 6.000 | 6,08 | 1,60 | 2,67 | 3,34 | 2,05 | 8.000 | 8,06 | 2,00 | 2,12 | 2,96 | 2,45 | 10.000 | 10,04 | 2,00 | 2,75 | 3,59 | 2,45 | 12.000 | 12,05 | 2,00 | 3,39 | 4,23 | 2,45 | 15.000 | 15,15 | 2,50 | 2,53 | 3,58 | 2,95 | 18.000 | 18,14 | 2,50 | 3,14 | 4,19 | 2,95 | 20.000 | 20,15 | 2,50 | 3,55 | 4,60 | 2,95 | 25.000 | 25,31 | 2,50 | 4,60 | 5,65 | 2,95 | 30.000 | 30,22 | 2,50 | 5,60 | 6,65 | 2,95 | 40.000 | 40,04 | 2,50 | 7,60 | 8,65 | 2,95 | 50.000 | 49,85 | 2,50 | 9,60 | 10,65 | 2,95 | 60.000 | 60,65 | 2,50 | 11,80 | 12,85 | 2,95 |
Note: Supports shall be designed for each case according to operating conditions and shall envelop 120 degrees as a minimum. These may be monolithic FRP, steel or concrete (independent) or the surrounding terrain, properly compacted in accordance to our specifications may also serve.
|
Tanks